Dell PowerEdge R350 Integrated Remote Access Controller 9 Attribute Registry - Page 283

BIOS.MiscSettings.PowerCycleRequest (Read or Write) Description This feature allows you to mimic a one-time AC power cycle. You will rarely need to use this feature. You may be directed to use it by Dell support. This feature is usually set to None. When you change it to Virtual AC, the system will do its best to mimic a temporary removal of AC power from the system (the AC Power Recovery feature will not be triggered by this action). The effect of this action is that some of the hardware components of the system that are always powered on when AC is present (even when the system appears to be off) will be reset. Using this feature is much more convenient than having to physically remove and reinsert the AC power cord, which would then trigger the AC Power Recovery feature when the cord was reinserted. Legal Values ● None ● FullPowerCycle Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MiscSettings.ReportKbdErr (Read or Write) Description This field sets whether keyboard-related error messages are reported at system startup. Legal Values ● Report ● NoReport Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MiscSettings.SysMgmtNVByte1 (Read or Write) Description System Management NVRAM Byte that can be used as a state flag. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS.MiscSettings.SysMgmtNVByte2 (Read or Write) Description System Management NVRAM Byte that can be used as a state flag. Legal Values ● N/A Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency Not applicable BIOS Attributes 283