Dell PowerEdge R350 Integrated Remote Access Controller 9 Attribute Registry - Page 930

NIC.VndrConfigPage.RDMANICModeOnPort (Read or Write) Description Enable/Disable the NIC + RDMA personality on the port. This setting is for when operating in non-NPar mode only. Note: This personality type may be specified as the port default if RDMA traffic can be supported irrespective of any other device mode or setting. Legal Values ● Enabled ● Disabled Default Value Varies Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.VndrConfigPage.RemotePHY (Read Only) Description Indicates whether RemotePHY capability is supported. Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.VndrConfigPage.RXFlowControl (Read Only) Description Indicates whether Receive (RX) Flow control capability is supported. Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.VndrConfigPage.SNAPI (Read Only) Description Indicates the adapter supports SNAPI functionality by either special interfacing to the PCI slot connector or via cabling to another PCI slot. Legal Values ● Available ● Unavailable Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable 930 NIC Attributes