Dell PowerEdge R350 Integrated Remote Access Controller 9 Attribute Registry - Page 796

Dependancy Cannot be set without User Name being set first iDRAC.Users.PrivacyProtocol (Read or Write) Description The Privacy Protocol for SNMP v3 Legal Values ● None-0 ● DES-1 ● AES-2 Default Value 2 Write Privilege Configure User License Required iDRAC Basic Dependancy Need valid username and password to set the attribute. The value could not be set to AES or DES if authentication protocol is none. iDRAC.Users.Privilege (Read or Write) Description Specifies the role-based authority privileges allowed for the user. Below list shows the decimal values for each individual privilege. To create a custom privilege, add up the privilege decimal values and set the attribute to the value. Login - 1, Configure - 2, Configure Users - 4, Logs - 8, System Control - 16, Access Virtual Console - 32, Access Virtual Media - 64, System Operations - 128, Debug - 256 Legal Values ● Integral values from 0 to 511 Default Value 0 Write Privilege Configure User License Required iDRAC Basic Dependancy Both UserName and Password must be configured prior to sets iDRAC.Users.ProtocolEnable (Read or Write) Description Enable SNMP v3 Protocol Legal Values ● Disabled-0 ● Enabled-1 Default Value 0 Write Privilege Configure User License Required iDRAC Basic Dependancy None iDRAC.Users.RSASecurID2FA (Read or Write) Description Legal Values Default Value Write Privilege Enables or disables RSA SecurID 2 Factor Authentication for the user. ● Disabled-0 ● Enabled-1 0 Configure User 796 iDRAC Attributes