Dell PowerEdge R350 Integrated Remote Access Controller 9 Attribute Registry - Page 875

NIC.DeviceLevelConfig.NParEP (Read or Write) Description Controls enablement of NParEP mode in which more than 8 PCI Physical Functions are exposed by the device. When disabled, the device must expose only a maximum of 8 PFs in the traditional PCI B:D:F addressing mode, regardless of any ARI capability being advertised for SR-IOV support. [Not to be implemented if not supported] Note: Not all PCI slots in all servers are capable of supporting virtualization features based on ARI and SR-IOV. The controller should check PCI config space settings to ensure that vitualization modes are available before allowing their selection by the user. Legal Values ● Enabled ● Disabled Default Value Disabled Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.DeviceLevelConfig.NPCP (Read or Write) Description Allows the use of Network Partition Control Protocol to be enabled or disabled when a network adapter is operating in Switch Dependent Partitioning mode. Note: Preliminary attribute definition only, based on the information available at the time of publication. Subject to change. Legal Values ● Enabled ● Disabled Default Value Enabled Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.DeviceLevelConfig.NumberPCIFunctionsSupported1 (Read Only) Description Defines the maximum number of PFs that can be enabled within the domain specified by VFAllocBasis. Legal Values None Default Value None Write Privilege None License Required iDRAC Express or iDRAC Enterprise Dependency Not Applicable NIC.DeviceLevelConfig.NumberVFSupported (Read Only) Description Legal Values Default Value The total number of PCI Virtual Functions supported on this port (or device). Whether the number applies to the device as a whole, or to an individual port, is indicated by the value of the Virtual Function Allocation Basis. ● N/A 0 NIC Attributes 875