Home » Dell Manuals » Servers » Dell PowerEdge R420 » Manual Viewer

Dell PowerEdge R420 Cable Routing Procedures - Page 1

Dell PowerEdge R420 Manual

View all Dell PowerEdge R420 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

Cable Routing Procedures for Dell™ PowerEdge™ R320 & R420 Systems This Dell Technical White Paper explains the best practices for routing and securing the cables exiting the back of the R320 & R420 systems. Greg Henderson and Jose L. Flores Data Center Infrastructure Engineering May 2012

Section	Page
Introduction	4
Section 1: Cabling a PowerEdge R320 or R420 system with a CMA	4
1.1. Connecting the cables to the system	4
1.2. Routing the power cables through the strain reliefs	5
1.3. Installing the CMA	5
1.3.1. Installing the inner CMA attachment bracket	5
1.3.2. Left-side mounting instructions	6
1.3.3. Right-side mounting instructions	7
Section 2: Replacing a hot swap power supply on a PowerEdge R320 or R420 system with a CMA	8
2.	8
2.1. Replacing a hot swap power supply with a left-side mounted CMA	8
2.2. Replacing a hot swap power supply with a right-side mounted CMA	8
Section 3: Cabling a PowerEdge R320 or R420 system on sliding rails without a CMA	10
3.	10
3.1. Routing the cables	10
3.2. Removing the outer CMA brackets for shallow racks	10

Match case Limit results 1 per page

Greg Henderson and Jose L. Flores

Data Center Infrastructure Engineering

May 2012

Cable Routing Procedures for Dell™

PowerEdge™ R320 & R420 Systems

This Dell Technical White Paper explains the best practices for routing

and securing the cables exiting the back of the R320 & R420 systems.