Dell PowerEdge R640 EMC PowerEdge R640 Technical Specifications - Page 10

NIC ports, Serial port, VGA ports, Video specifications, IDSDM or vFlash card

Page 10 highlights

NIC ports The PowerEdge R640 system supports four Network Interface Controller (NIC) ports on the back panel, which are available in the following configurations: • Four RJ-45 ports that support 10, 100 and 1000 Mbps • Four RJ-45 ports that support 100 M, 1 G and 10 Gbps • Four RJ-45 ports, where two ports support maximum of 10 G and the other two ports maximum of 1 Gbps • Two RJ-45 ports that support up to 1 Gbps and 2 SFP+ ports that support up to 10 Gbps • Four SFP+ ports that support up to 10 Gbps • Two SFP28 ports that support up to 25 Gbps NOTE: You can install up to three PCIe add-on NIC cards. NOTE: The NDC slot is not hot-pluggable. Serial port The PowerEdge R640 system supports one serial port on the back panel. This port is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant. NOTE: The Serial port is not hot-pluggable. VGA ports The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The PowerEdge R640 system supports one 15pin VGA port on the front and back of system. NOTE: The VGA ports are not hot-pluggable. Video specifications The PowerEdge R640 system supports integrated Matrox G200eW3 graphics controller with 16 MB of video frame buffer . Table 6. Supported video resolution options Resolution Refresh rate (Hz) 640 x 480 60, 70 800 x 600 60, 75, 85 1024 x 768 60, 75, 85 1152 x 864 60, 75, 85 1280 x 1024 60, 75 1440 x 900 60 1920 x 1200 60 Color depth (bits) 8, 16, 32 8, 16, 32 8, 16, 32 8, 16, 32 8, 16, 32 8, 16, 32 8, 16, 32 IDSDM or vFlash card The PowerEdge R640 system supports Internal Dual SD module (IDSDM) and vFlash card. In the 14th generation of PowerEdge servers, IDSDM and vFlash card are combined into a single module, and are available in the following options: • vFlash or • vFlash and IDSDM The IDSDM/vFlash card can be connected in a Dell-proprietary PCIe x1 slot using a USB 3.0 interface to host. IDSDM/vFlash module supports two MicroSD cards for IDSDM and one card for vFlash. The MicroSD card capacity for IDSDM are 16, 32, or 64 GB, while for vFlash the MicroSD card capacity is 16 GB. The IDSDM or vFlash module combines the IDSDM or vFlash features into a single module. 10 Technical specifications

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

NIC ports
The PowerEdge R640 system supports four Network Interface Controller (NIC) ports on the back panel, which are available in the
following configurations:
Four RJ-45 ports that support 10, 100 and 1000 Mbps
Four RJ-45 ports that support 100 M, 1 G and 10 Gbps
Four RJ-45 ports, where two ports support maximum of 10 G and the other two ports maximum of 1 Gbps
Two RJ-45 ports that support up to 1 Gbps and 2 SFP+ ports that support up to 10 Gbps
Four SFP+ ports that support up to 10 Gbps
Two SFP28 ports that support up to 25 Gbps
NOTE:
You can install up to three PCIe add-on NIC cards.
NOTE:
The NDC slot is not hot-pluggable.
Serial port
The PowerEdge R640 system supports one serial port on the back panel. This port is a 9-pin connector, Data Terminal Equipment (DTE),
16550-compliant.
NOTE:
The Serial port is not hot-pluggable.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The PowerEdge R640 system supports one 15-
pin VGA port on the front and back of system.
NOTE:
The VGA ports are not hot-pluggable.
Video specifications
The PowerEdge R640 system supports integrated Matrox G200eW3 graphics controller with 16 MB of video frame buffer .
Table 6. Supported video resolution options
Resolution
Refresh rate (Hz)
Color depth (bits)
640 x 480
60, 70
8, 16, 32
800 x 600
60, 75, 85
8, 16, 32
1024 x 768
60, 75, 85
8, 16, 32
1152 x 864
60, 75, 85
8, 16, 32
1280 x 1024
60, 75
8, 16, 32
1440 x 900
60
8, 16, 32
1920 x 1200
60
8, 16, 32
IDSDM or vFlash card
The PowerEdge R640 system supports Internal Dual SD module (IDSDM) and vFlash card. In the 14th generation of PowerEdge servers,
IDSDM and vFlash card are combined into a single module, and are available in the following options:
vFlash or
vFlash and IDSDM
The IDSDM/vFlash card can be connected in a Dell-proprietary PCIe x1 slot using a USB 3.0 interface to host. IDSDM/vFlash module
supports two MicroSD cards for IDSDM and one card for vFlash. The MicroSD card capacity for IDSDM are 16, 32, or 64 GB, while for
vFlash the MicroSD card capacity is 16 GB. The IDSDM or vFlash module combines the IDSDM or vFlash features into a single module.
10
Technical specifications