Dell PowerEdge R640 EMC PowerEdge R640 Technical Specifications - Page 11

Environmental specifications

Page 11 highlights

NOTE: There are two dip switches on the IDSDM/vFlash card for write-protection. NOTE: One IDSDM card slot is dedicated for redundancy. NOTE: It is recommended to use Dell branded MicroSD cards associated with the IDSDM/vFlash configured systems. NOTE: The IDSDM and vFlash slot is not hot-pluggable. Environmental specifications NOTE: For additional information about environmental certifications, please refer to the Product Environmental Datasheet located with the Manuals & Documents on www.dell.com/poweredgemanuals Table 7. Temperature specifications Temperature Specifications Storage -40°C to 65°C (-40°F to 149°F) Continuous operation (for altitude less than 950 m or 3117 ft) 10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment. NOTE: Maximum of 205 W, 28 core processor is supported in systems with eight 2.5 inch processor direct attached PCIe SSD drives, and three PCIe slot chassis. NOTE: Certain configurations may have ambient temperature restrictions. For more information see the Ambient temperature limitations section. Fresh air Maximum temperature gradient (operating and storage) For information about fresh air, see Expanded Operating Temperature section. 20°C/h (68°F/h) Table 8. Relative humidity specifications Relative humidity Storage Operating Specifications 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be non-condensing at all times. 10% to 80% relative humidity with 29°C (84.2°F) maximum dew point. Table 9. Maximum vibration specifications Maximum vibration Operating Storage Table 10. Maximum shock specifications Maximum shock Operating Storage Specifications 0.26 Grms at 5 Hz to 350 Hz (all operation orientations). 1.88 Grms at 10 Hz to 500 Hz for 15 min (all six sides tested). Specifications Six consecutively executed shock pulses in the positive and negative x, y, and z axes of 6 G for up to 11 ms. Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for up to 2 ms. Table 11. Maximum altitude specifications Maximum altitude Operating Specifications 3048 m (10,000 ft) Technical specifications 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

NOTE:
There are two dip switches on the IDSDM/vFlash card for write-protection.
NOTE:
One IDSDM card slot is dedicated for redundancy.
NOTE:
It is recommended to use Dell branded MicroSD cards associated with the IDSDM/vFlash configured systems.
NOTE:
The IDSDM and vFlash slot is not hot-pluggable.
Environmental specifications
NOTE:
For additional information about environmental certifications, please refer to the Product Environmental
Datasheet located with the Manuals & Documents on
www.dell.com/poweredgemanuals
Table 7. Temperature specifications
Temperature
Specifications
Storage
–40°C to 65°C (–40°F to 149°F)
Continuous operation (for altitude less than 950 m or 3117
ft)
10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment.
NOTE:
Maximum of 205 W, 28 core processor is supported in
systems with eight 2.5 inch processor direct attached PCIe SSD
drives, and three PCIe slot chassis.
NOTE:
Certain configurations may have ambient temperature
restrictions. For more information see the Ambient temperature
limitations section.
Fresh air
For information about fresh air, see
Expanded Operating Temperature
section.
Maximum temperature gradient (operating and storage)
20°C/h (68°F/h)
Table 8. Relative humidity specifications
Relative humidity
Specifications
Storage
5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must
be non-condensing at all times.
Operating
10% to 80% relative humidity with 29°C (84.2°F) maximum dew point.
Table 9. Maximum vibration specifications
Maximum vibration
Specifications
Operating
0.26 G
rms
at 5 Hz to 350 Hz (all operation orientations).
Storage
1.88 G
rms
at 10 Hz to 500 Hz for 15 min (all six sides tested).
Table 10. Maximum shock specifications
Maximum shock
Specifications
Operating
Six consecutively executed shock pulses in the positive and negative x, y,
and z axes of 6 G for up to 11 ms.
Storage
Six consecutively executed shock pulses in the positive and negative x, y,
and z axes (one pulse on each side of the system) of 71 G for up to 2 ms.
Table 11. Maximum altitude specifications
Maximum altitude
Specifications
Operating
3048 m (10,000 ft)
Technical specifications
11