Dell PowerEdge R7525 EMC Technical Specifications - Page 11
Table 5. Rear view of the system continued
View all Dell PowerEdge R7525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Table 5. Rear view of the system (continued) Item Ports, panels, or slots Icon 12 OCP NIC port (optional) N/A 13 NIC port (1,2) 14 Power supply unit (PSU 1) Description This port supports OCP 3.0. The NIC ports are integrated on the OCP card which is connected to the system board. The NIC ports are embedded on the LOM card that is connected to the system board. For more information about the PSU configurations, see the Technical Specifications section. For more information about the ports, see the Technical Specifications section. Figure 10. Rear view of the system with 2 x 2.5-inch rear drive module Table 6. Rear view of the system with 2 x 2.5-inch rear drive module Item 1 Ports, panels, or slots PCIe expansion card riser 1 (slot 1 and slot 2) Icon N/A Description The expansion card riser enables you to connect PCI Express expansion cards. For more information on the expansion cards that are supported on your system, see Technical Specifications section. 2 Rear Handle N/A 3 PCIe expansion card riser 2 N/A (slot 3 and slot 6) To lift the system. The expansion card riser enables you to connect PCI Express expansion cards. For more information on the expansion cards that are supported on your system, see Technical Specifications section. 4 Rear drive module N/A Enables you to install drives that are supported on your system. For more information about drives, see the Drives section. 5 USB 2.0 port (1) This port is USB 2.0-compliant. 6 PCIe expansion card riser 4 N/A (slot 7 and slot 8) 7 Power supply unit (PSU 2) 8 VGA port 9 USB 3.0 port (1) The expansion card riser enables you to connect PCI Express expansion cards. For more information on the expansion cards that are supported on your system, see Technical Specifications section. For more information about the PSU configurations, see the Technical Specifications section. Enables you to connect a display device to the system. For more information, see the Technical Specifications section. This port is USB 3.0-compliant. 10 iDRAC dedicated port 11 System identification button Enables you to remotely access iDRAC. For more information, see the iDRAC User's Guide at www.dell.com/poweredgemanuals. Press the system ID button: • To locate a particular system within a rack. • To turn the system ID on or off. System overview 11