Dell PowerEdge R905 Installation and Troubleshooting Guide (.htm) - Page 20
see Pull up on the slide-release latches and push the system into the rack.
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Figure 1-7. Installing the System in the Rack 1 1 system locking mechanism 4 Engage the back shoulder screws in the slot just behind the slide-release latch, followed by the middle and front shoulder screws. 5 Push the system inward on the slide assemblies until the system-locking mechanism clicks into place, locking the slide to the system (see Figure 1-7). 6 Pull up on the slide-release latches and push the system into the rack. 7 Tighten the thumbscrews on the rack front panel. 18 Dell™ Rack Installation Guide
18
Dell™ Rack Installation Guide
Figure 1-7.
Installing the System in the Rack
4
Engage the back shoulder screws in the slot just behind the slide-release
latch, followed by the middle and front shoulder screws.
5
Push the system inward on the slide assemblies until the system-locking
mechanism clicks into place, locking the slide to the system
(see Figure 1-7).
6
Pull up on the slide-release latches and push the system into the rack.
7
Tighten the thumbscrews on the rack front panel.
1
system locking mechanism
1