Dell PowerEdge T340 EMC Technical Specifications - Page 12

System battery specifications The Dell EMC PowerEdge T340 system supports CR 2032 3.0-V lithium coin cell system battery. Expansion card specifications The Dell EMC PowerEdge T340 system supports up to four PCI express (PCIe) Generation 3. Table 5. Expansion card slots supported on the system board PCIe slot Slot 1 (Gen3) Processor Connection PCIe slot height Processor Full Height PCIe slot length Half Length Slot 2 (Gen3) Processor Full Height Half Length Slot 3 (Gen3) Platform Controller Hub Full Height Half Length Slot 4 (Gen3) Platform Controller Hub Full Height Half Length Slot width x8 link in x8 slot x8 link in x16 slot x1 x4 link in x8 slot NOTE: The expansion cards are not hot swappable. Memory specifications The Dell EMC PowerEdge T340 system supports the following memory specifications for optimized operation: Table 6. Memory specifications DIMM type DIMM rank Single rank DIMM capacity 8 GB Minimum RAM 8 GB Maximum RAM 32 GB UDIMM Dual rank 16 GB 8 GB 16 GB 8 GB 64 GB 32 GB Table 6. Memory specifications Memory module sockets Four 288-pin 16 GB Speed 2666 MT/s 2400 MT/s 2133 MT/s 16 GB 64 GB Storage controller specifications The Dell EMC PowerEdge T340 system supports the following controller cards: Table 7. Dell EMC PowerEdge T340 system controller cards Internal controllers External controllers • PERC H730P • PERC H330 • S140 • HBA330 • 12Gbps SAS Ext. HBA 12 Technical specifications