Dell PowerEdge T340 EMC Technical Specifications - Page 13

Drive specifications Drives The Dell EMC PowerEdge T340 system supports: • 4 x 3.5-inch SAS, SATA drives, 2.5-inch hotplug drives • 8 x 3.5-inch SAS, SATA drives, 2.5-inch hotplug drives NOTE: 2.5-inch drives in 3.5-inch carriers are supported for SAS, and SATA SSD drives. Optical drives The Dell EMC PowerEdge T340 system supports the following optical drives. Table 8. Supported optical drive type Supported drive type Dedicated SATA DVD-ROM drive or DVD +/-RW drive Supported number of drives One Tape drives The Dell EMC PowerEdge T340 system supports up to two dedicated 5.25-inch tape drives. Ports and connectors specifications USB ports specifications Table 9. Dell EMC PowerEdge T340 system USB port specifications Front panel Back panel Internal USB • One USB 3.0-compliant port • One iDRAC USB MGMT port (USB 2.0) NOTE: The micro USB 2.0 compliant port can only be used as an iDRAC Direct or a management port. • Two USB 3.0-compliant ports • Four USB 2.0-compliant ports • One internal USB 3.0-compliant port NIC ports specifications The Dell EMC PowerEdge T340 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports that are located on the back panel. Serial connector specifications The Dell EMC PowerEdge T340 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant. VGA ports specification The Dell EMC PowerEdge T340 system supports one 15-pin VGA port, on the back of the system. Technical specifications 13