Dell PowerEdge T440 EMC Technical Specifications 1 - Page 8
Memory specifications, Storage controller specifications, Drives, Optical drive and tape drive
View all Dell PowerEdge T440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Memory specifications Table 4. Memory specifications DIMM type DIMM rank DIMM capacity RDIMM RDIMM RDIMM LRDIMM Single rank Dual rank Dual rank Quad rank 8 GB 16 GB 32 GB 64 GB Single processor Minimum RAM Maximum RAM 8 GB 80 GB 16 GB 160 GB 32 GB 320 GB 64 GB 640 GB Storage controller specifications Dual processors Minimum RAM Maximum RAM 16 GB 128 GB 32 GB 256 GB 64 GB 512 GB 128 GB 1024 GB The Dell EMC PowerEdge T440 system supports: • Internal controllers: PowerEdge Expandable RAID Controller (PERC) H730P, HBA330, H740P, H330, Software RAID (SWRAID)S140 • External PERC (RAID): H840 • External HBAs (non-RAID): 12Gbps SAS HBA • Boot Optimized Storage Subsystem (BOSS): HWRAID 2 x M.2 SSDs 120GB or 240GB with 6Gbps - x8 connector using PCIe gen 2.0 x2 lanes, available only in the low-profile and half-height form factor Drive specifications Drives The Dell EMC PowerEdge T440 system supports: • Up to 4 x 3.5-inch cabled drives with drive adapter, internal, SATA, or Nearline SAS drives or • Up to 8 x 3.5-inch hot swappable drives with drive adapter, internal, hot swappable SAS/SATA drives or • Up to 16 x 2.5-inch hot swappable drives with drive adapter, internal, hot swappable SAS/SATA drives Optical drive and tape drive The Dell EMC PowerEdge T440 system supports: • one optional slim SATA DVD-ROM drive or DVD +/-RW drive • internal tape drives LTO5, LTO6, LTO7 and external SAS drives. Your system supports one of the following configurations: • Systems with cabled drives support one optical drive and one tape drive. • Systems with hot-swappable drives support up to one optical drive and two tape drives. 8 Technical specifications