Dell PowerEdge T440 EMC Technical Specifications 1 - Page 9
Ports and connectors specifications, USB ports, NIC ports, VGA ports, Serial connector
![]() |
View all Dell PowerEdge T440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Ports and connectors specifications USB ports Dell EMC PowerEdge T440 system Table 5. USB specifications Front panel • One USB 2.0-compliant port • One USB 3.0-compliant port Back panel • 4 USB 2.0-compliant rear ports • 2 USB 3.0-compliant rear ports NIC ports The Dell EMC PowerEdge T440 system supports two Network Interface Controller (NIC) ports on the back panel each with 1 Gbps configuration. NOTE: You can install up to five PCIe add-on cards. VGA ports The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The Dell EMC PowerEdge T440 system supports one 15-pin VGA ports on the back of the system. Serial connector The Dell EMC PowerEdge T440 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-compliant. Internal Dual microSD Module or vFlash card The Dell EMC PowerEdge T440 system supports Internal Dual microSD module (IDSDM) and vFlash card. In 14th generation of PowerEdge servers, IDSDM and vFlash card are combined into a single card module, and are available in these configurations: • vFlash or • IDSDM or • vFlash and IDSDM The IDSDM/vFlash card sits in the back of the system, in a Dell-proprietary slot. IDSDM/vFlash card supports three micro SD cards (two cards for IDSDM and one card for vFlash). MicroSD cards capacity for IDSDM are 16/32/64 GB while for vFlash the microSD card capacity is 16 GB. Micro SD cards are supported only on IDSDM SD card slots. The IDSDM or vFlash module combines the IDSDM or vFlash features into a single module. Technical specifications 9
![](/manual_guide/products/dell-poweredge-t440-emc-technical-specifications-608e9e0/9.png)