Dell PowerEdge T550 EMC Technical Specifications - Page 16
Table 24. 8 x 2.5-inch, 16 x 2.5-inch, 24 x 2.5-inch drive configuration
![]() |
View all Dell PowerEdge T550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Table 24. 8 x 2.5-inch, 16 x 2.5-inch, 24 x 2.5-inch drive configuration Standard Operating Support (ASHRAE A2 compliant) Extended ambient 40° C Operating Extended ambient 45° C Operating Support (ASHRAE A3 compliant) Support (ASHRAE A4 compliant) ● Optic cable with spec 85C is required. ● Two PSUs are required. System performance may be reduced in the event of a PSU failure. ● OCP transfer rate >25G or cooling tier > 10 not supported. ● Optic cable with spec 85C is required. ● Two PSUs are required. System performance may be reduced in the event of a PSU failure. Table 25. 8 x 3.5-inch x 8 x NVMe drive configuration Standard Operating Support (ASHRAE A2 compliant) Extended ambient 40° C Operating Support (ASHRAE A3 compliant) HPR fans are required. ● TBU not supported. ● Non-Dell qualified peripheral cards and Channel devices (FW) cards are not supported. ● NIC consuming power >= 25 W not supported. For example: CX6 card. ● OCP transfer rate > 25G or cooling tier > 10 not supported. ● Optic cable with spec 85C is required. ● Two PSUs are required. System performance may be reduced in the event of a PSU failure. Extended ambient 45° C Operating Support (ASHRAE A4 compliant) ● 4x HPR fans configurations with CPU TDP > 165 W are not supported. ● TBU not supported. ● BOSS M.2 module is not supported. ● Non-Dell qualified peripheral cards and Channel devices (FW) cards are not supported. ● NIC consuming power >= 25 W. For example: CX6 card. ● OCP transfer rate >25G or cooling tier > 10 not supported. ● Optic cable with spec 85C is required. ● Two PSUs are required. System performance may be reduced in the event of a PSU failure. 16 Technical specifications
![](/manual_guide/products/dell-poweredge-t550-emc-technical-specifications-39a3f3a/16.png)