Dell PowerVault 122T LTO Dell PowerVault 122T LTO Autoloader User's Guide - Page 40

Back to Contents Page Technical Specifications: Dell™ PowerVault™ 122T LTO Autoloader User's Guide Physical Specifications Autoloader Specifications Autoloader Environmental Specifications Tape Drive Specifications Physical Specifications Characteristic Product Alone Packaged Height 8.4 cm (3.34 in) 20.5 cm (8.0 in) Width 41.9 cm (16.5 in) 60 cm (23.6 in) Depth 60.9 cm (24 in) (Approximately 65 cm (25.6 in) with Bar Code Reader) 74.3 cm (29.2) Weight 10 kg (22 lb) 13 kg (29 lb) Autoloader Specifications Characteristic Maximum storage capacity Maximum data transfer rate Drive type Number of slots MCBF Interface Specification Native: 800 GB Compressed: 1.6 TB (assuming 2:1 compression ratio) Native: 15 MB/s Compressed: 30 MB/s (assuming 2:1 compression ratio) 1 LTO drive 8 250,000 hours LVD ultra wide SCSI-2, 16 bits wide, 68-pin HD connector Autoloader Environmental Specifications Characteristic Temperature/humidity Operating Non-operating Recommended operating temperature Temperature shock immunity-maximum rate of change Humidity Operating Non-operating Altitude Operating Non-operating Vibration (5-500 Hz) Maximum acceleration to operating Frequency range Specification 10° to 35°C (Wet bulb temp, 32°C max) -40° to 65°C (Wet bulb temp, 40°C max) 20° to 30°C (Wet bulb temp, 30°C max) 10°C per hour 20% to 80% RH non-condensing 5% to 95% RH non-condensing 0 to 4000 m 0 to 9144 m 0.25g RMS (random) 500 Hz Tape Drive Specifications LTO Drive Specifications Description Read/write transfer rate: maximum sustained Burst transfer rate Average access time Loading time to BOT (for previously written tape) Unloading time from BOT MTBF Interface type (LTO) Non-compressed mode: 15.0 MB/s Compressed (2:1 typical): 30.0 MB/s 80 MB/s 71 seconds