Dell PowerVault DL2200 CommVault Hardware Owner's Manual - Page 109
See Removing an Expansion Card
View all Dell PowerVault DL2200 CommVault manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Figure 3-20. Replacing the System Battery 1 3 2 1 system battery 3 positive side of battery connector 2 negative side of battery connector 4 If installed, remove the expansion card from the expansion-card slot. See "Removing an Expansion Card" on page 92. 5 If installed, remove the storage controller card. See "Removing the Storage Controller Card" on page 95. 6 To remove the expansion-card riser, press the blue tabs on the expansion-card riser and lift it from the chassis. See "Removing an Expansion-Card Riser" on page 93. 7 Locate the battery socket. See "Jumpers and Connectors" on page 151. CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery. 8 Support the battery connector by firmly holding the positive side of the connector. Installing System Components 109