Dell PowerVault DL2200 CommVault Hardware Owner's Manual - Page 155
Reconnect your system and peripherals to their electrical outlets, and turn
![]() |
View all Dell PowerVault DL2200 CommVault manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
NOTE: If you assign a new system and/or setup password with the jumper plug still in the "disabled" position, the system disables the new password(s) the next time it boots. 6 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 7 Open the system. See "Opening the System" on page 64. 8 Move the password jumper back to the enabled position to restore the password function. See Table 6-1. 9 Close the system. See "Closing the System" on page 65. 10 Reconnect your system and peripherals to their electrical outlets, and turn on the system. 11 Assign a new system and/or setup password. To assign a new password using the System Setup program, see "System and Setup Password Features" on page 53. Jumpers and Connectors 155
![](/manual_guide/products/dell-powervault-dl2200-commvault-hardware-owners-manual-4374975/155.png)