Dell PowerVault DL2200 CommVault Hardware Owner's Manual - Page 46
PCI IRQ Assignments Screen, Configuration and Power Interface ACPI 3.0b specification.
View all Dell PowerVault DL2200 CommVault manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Option Description Internal USB Port 1 (On default) Enables or disables the internal USB port. Internal USB Port 2 (On default) Enables or disables the internal USB port. Embedded NIC1 and NIC2 (Enabled default) Enables or disables the OS interface of the two embedded NICs. (The NICs may also be accessed through the system's management controller.) Embedded Gb NICx (NIC1 default: Enabled with PXE; Other NICs: Enabled) Enables or disables the embedded NICs. Options are Enabled, Enabled with PXE, and Enabled with iSCSI Boot. PXE support allows the system to boot from the network. MAC Address Displays the MAC address for the NIC. OS Watchdog Timer (Disabled default) Sets a timer to monitor the operating system for activity, and aids in recovery if the system stops responding. When Enabled, the operating system is allowed to initialize the timer. When Disabled, the timer is not initialized. NOTE: This feature is usable only with operating systems that support WDAT implementations of the Advanced Configuration and Power Interface (ACPI) 3.0b specification. I/OAT DMA Engine (Disabled default) Enables or disables the I/O acceleration technology (I/OAT). This feature should only be enabled if the hardware and software support I/OAT. Embedded Video Controller (Enabled default) Displays the total amount of video memory available in the embedded video controller. PCI IRQ Assignments Screen Option Embedded X-treme PCI Adapter Description Use the and keys to manually select an IRQ for a given device, or select Default to allow the BIOS to select an IRQ value at system startup. 46 Using the System Setup Program and UEFI Boot Manager