Dell PowerVault MD3000i Dell PowerVault MD3000/MD3000i RAID Controller Pass - Page 4
Service Interface Main Menu, Tools, Set Or Change Password, Current Password - documentation
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
3 When prompted for input within 5 seconds, press for the Service Interface Menu. NOTE: The "S" must be capitalized. A lower-case "s" will not access the Service Interface Menu. 4 When prompted for a password, use the password provided by Dell Technical Support. Upon successful login, the Service Interface Main Menu is displayed in the terminal window. 5 At the prompt, press and . 6 When prompted if you want to reset your storage array password, press and . 7 Close HyperTerminal or MINICOM. 8 Remove password reset cable. 9 To set a new password, go to the Modular Disk Storage Manager software under the Tools tab and click Set Or Change Password Link. 10 Leave the Current Password blank, enter the new password twice, and click OK. Information in this document is subject to change without notice. © 2009 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and PowerVault are trademarks of Dell Inc.; Microsoft, Windows, Windows Server, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.