Dell PowerVault MD3460 Owners Manual - Page 21
Installing System Components, Recommended Tools, Removing And Installing The Front Bezel
 |
View all Dell PowerVault MD3460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3 Installing System Components Recommended Tools You may need the following items to perform the procedures in this section: • #2 Phillips screwdriver • T8 and T15 Torx screwdrivers • Wrist grounding strap connected to ground Removing And Installing The Front Bezel Installing The Front Bezel You must install the front bezel on the system to secure the disk drawers against accidental removal. 1. Align the slots on the back of the bezel with the guide pins on the front of the chassis. 2. Push the bezel toward the chassis until the bezel is seated properly and the release latches snap into place. Figure 10. Removing and Installing the Front Bezel 1. release latches (2) 3. guide pins (4) 2. front bezel 21
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24 -
25 -
26 -
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
 |
 |
3
Installing System Components
Recommended Tools
You may need the following items to perform the procedures in this section:
•
#2 Phillips screwdriver
•
T8 and T15 Torx screwdrivers
•
Wrist grounding strap connected to ground
Removing And Installing The Front Bezel
Installing The Front Bezel
You must install the front bezel on the system to secure the disk drawers against accidental removal.
1.
Align the slots on the back of the bezel with the guide pins on the front of the chassis.
2.
Push the bezel toward the chassis until the bezel is seated properly and the release latches snap into
place.
Figure 10. Removing and Installing the Front Bezel
1.
release latches (2)
2.
front bezel
3.
guide pins (4)
21