Dell PowerVault MD3460 Owners Manual - Page 29

Removing A Physical Disk From A Physical-Disk Drawer

Page 29 highlights

Removing A Physical Disk From A Physical-Disk Drawer CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Remove the front bezel. 2. Identify the physical-disk drawer in which the faulty physical disk is installed. 3. Open the physical-disk drawer. 4. Identify and locate the faulty physical disk in the physical-disk drawer. CAUTION: Remove the physical disk from the system only if the service action allowed indicator lights blue. Removing the physical disk from the system when the service action allowed indicator is off may damage the system. NOTE: The service action required indicator lights blue on the: - RAID controller module - physical-disk drawer - physical disk 5. Press the release tab to disengage the physical-disk carrier handle. 6. Rotate the physical-disk carrier handle upward to disengage the physical disk from its connector. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51

Removing A Physical Disk From A Physical-Disk Drawer
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Remove the front bezel.
2.
Identify the physical-disk drawer in which the faulty physical disk is installed.
3.
Open the physical-disk drawer.
4.
Identify and locate the faulty physical disk in the physical-disk drawer.
CAUTION: Remove the physical disk from the system only if the service action allowed
indicator lights blue. Removing the physical disk from the system when the service action
allowed indicator is off may damage the system.
NOTE:
The
service action required
indicator lights blue on the:
RAID controller module
physical-disk drawer
physical disk
5.
Press the release tab to disengage the physical-disk carrier handle.
6.
Rotate the physical-disk carrier handle upward to disengage the physical disk from its connector.
29