Dell PowerVault TL4000 Dell PowerVault TL4000 Failover Configuration Guide - Page 13
Heterogeneous validated configurations, Fibre Channel and one LT05 Fibre Channel drive
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Dell PowerVault™ TL4000/TL2000 Failover Guide Failover configuration (one host with three dual port HBAs, and three SAS drives) Main Path Failover Path Figure 9: Reference Configuration 9 Important Note: This configuration can be extended up to four drives provided the host system can support four dual SAs HBAs. Heterogeneous validated configurations Heterogonous configurations have some limitations, if the configuration contains LT04 and LT05 drives, the Library must contain only LT04 media for proper operations. Important Note: Heterogeneous configurations containing LT03 drives are not supported Failover Reference Configuration 10: One host, one Fibre Channel switch and one PowerVault™ library configured with one LT04 Fibre Channel and one LT05 Fibre Channel drive In this configuration, failover occurs if one of the drives in the library fails (hardware failure or drive is disconnected from the Fibre Channel switch). The physical connection of this configuration is shown in figure 10 13 | P a g e 12/31/09 version 2.0 Always refer to www.dell.com\support for latest documentation and updates