Dell PowerVault TL4000 Dell PowerVault TL4000 Failover Configuration Guide - Page 7
Failover Reference Configuration 4, One Host with dual Fibre Channel HBAs
View all Dell PowerVault TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Dell PowerVault™ TL4000/TL2000 Failover Guide Failover configuration (one host with two HBAs, and two SAS drives) Main Path Failover Path Figure 3: Reference Configuration 3 Failover Reference Configuration 4: One Host with dual Fibre Channel HBAs, two Fibre Channel switches and a Dell PowerVault™ with two Fibre Channel drives In this configuration, failover occurs if one or more of the following occurs: ‐ One of the drives fails (hardware failure or is drive disconnected from the HBA port) ‐ One of the HBA controllers fails ‐ One of the switches fails The physical connection of this configuration is shown in Figure 4. Important Note: Dell Recommends Fibre Channel drives to be same generation. For Heterogonous configurations refer to section: Heterogonous Validated Configurations 7|Page 12/31/09 version 2.0 Always refer to www.dell.com\support for latest documentation and updates