Dell Precision M2800 Dell Owners Manual - Page 23

Installing the WLAN Card, Removing the Wireless Wide Area Network (WWAN) Card, base cover, battery

Get Dell Precision M2800 PDF manuals and user guides View all Dell Precision M2800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Installing the WLAN Card 1. Insert the WLAN card in its connector at a 45-degree angle in its slot. 2. Tighten the screw to secure the WLAN card to the computer. 3. Connect the antenna cables to their respective connectors marked on the WLAN card. 4. Install: a. base cover b. battery 5. Follow the procedures in After Working Inside Your Computer. Removing the Wireless Wide Area Network (WWAN) Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. battery b. base cover 3. Perform the following steps as shown in the illustration: a. Disconnect the antenna cables from the WWAN card. b. Remove the screw that secures the WWAN card to the computer. c. Remove the WWAN card from the computer. Installing the WWAN Card 1. Place the WWAN card in its slot in the system board. 2. Press the WWAN card down and tighten the screw to secure the WWAN card to the computer. 3. Connect the antenna cables to their connectors on the WWAN card. 4. Install: a. base cover b. battery 5. Follow the procedures in After Working Inside Your Computer. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
Installing the WLAN Card
1.
Insert the WLAN card in its connector at a 45–degree angle in its slot.
2.
Tighten the screw to secure the WLAN card to the computer.
3.
Connect the antenna cables to their respective connectors marked on the WLAN card.
4.
Install:
a.
base cover
b.
battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Wireless Wide Area Network (WWAN) Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
battery
b.
base cover
3.
Perform the following steps as shown in the illustration:
a.
Disconnect the antenna cables from the WWAN card.
b.
Remove the screw that secures the WWAN card to the computer.
c.
Remove the WWAN card from the computer.
Installing the WWAN Card
1.
Place the WWAN card in its slot in the system board.
2.
Press the WWAN card down and tighten the screw to secure the WWAN card to the computer.
3.
Connect the antenna cables to their connectors on the WWAN card.
4.
Install:
a.
base cover
b.
battery
5.
Follow the procedures in
After Working Inside Your Computer
.
23