Dell Precision M2800 Dell Owners Manual - Page 27

Removing the Heat-Sink Assembly, Before Working Inside Your Computer, battery, base cover

Get Dell Precision M2800 PDF manuals and user guides View all Dell Precision M2800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Removing the Heat-Sink Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. battery b. base cover 3. Disconnect the fan cable and remove the screws that secure the heat-sink assembly to the system board. 4. Perform the following steps as shown in the illustration: a. Slide the heat-sink assembly. b. Lift the heat-sink assembly from the computer. Installing the Heat-Sink Assembly 1. Slide the heat-sink assembly to its position on the system board. 2. Tighten the screws to secure the heat-sink assembly to the system board. 3. Connect the fan cable to the system board. 4. Install: a. base cover b. battery 5. Follow the procedures in After Working Inside Your Computer. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
Removing the Heat-Sink Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
battery
b.
base cover
3.
Disconnect the fan cable and remove the screws that secure the heat-sink assembly to the system
board.
4.
Perform the following steps as shown in the illustration:
a.
Slide the heat-sink assembly.
b.
Lift the heat-sink assembly from the computer.
Installing the Heat-Sink Assembly
1.
Slide the heat-sink assembly to its position on the system board.
2.
Tighten the screws to secure the heat-sink assembly to the system board.
3.
Connect the fan cable to the system board.
4.
Install:
a.
base cover
b.
battery
5.
Follow the procedures in
After Working Inside Your Computer
.
27