Dell Precision M70 Service Manual - Page 24
Keyboard
View all Dell Precision M70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Back to Contents Page Keyboard Dell Precision™ M70 Service Manual CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Turn the computer top-side up and open it. 1 display 2 center control cover 3 computer base 3. Remove the center control cover. 4. Remove the keyboard: a. Remove the two M2.5 x 5-mm screws across the top of the keyboard. NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard. b. Lift the keyboard and slide it toward the back of the computer to disengage the tabs. c. Hold the keyboard up at an angle and slightly back to allow access to the keyboard connector. d. Pull up on the keyboard connector tab to disconnect the keyboard connector from the system board.