Dell Precision M70 Service Manual - Page 7

Internal Card With Bluetooth, Wireless Technology

Page 7 highlights

Back to Contents Page Internal Card With Bluetooth® Wireless Technology Dell Precision™ M70 Service Manual CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. If you ordered an internal card with Bluetooth® wireless technology with your computer, the card is already installed. Removing the Card With Bluetooth Wireless Technology 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the main battery. 3. Locate the small access door in the battery compartment. 1 small access door 4. Press the latch on the small access door and lift the door out. 5. Remove the screw holding the Bluetooth wireless technology card. 6. Grasp the card and disconnect it from the connector cable. 7. Remove the card from the computer.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46

Back to Contents Page
Internal Card With Bluetooth
®
Wireless Technology
Dell Precision™ M70 Service Manual
If you ordered an internal card with Bluetooth
®
wireless technology with your computer, the card is already installed.
Removing the Card With Bluetooth Wireless Technology
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the main
battery
.
3.
Locate the small access door in the battery compartment.
4.
Press the latch on the small access door and lift the door out.
5.
Remove the screw holding the Bluetooth wireless technology card.
6.
Grasp the card and disconnect it from the connector cable.
7.
Remove the card from the computer.
CAUTION:
Before performing the following procedures, read the safety instructions in your
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
small access door