Dell S1909WFP User's Guide - Page 26

Back to Contents Page Setting Up the Monitor Dell™ S1909W Flat Panel Monitor User's Guide Attaching the Base Connecting the Monitor Attaching the Soundbar (optional) Removing the Base Attaching the Base NOTE: The base is detached when the monitor is shipped from the factory. After placing the monitor panel on a soft cloth or cushion, complete the following steps to attach the base. 1. Place the monitor on a flat surface. 2. Attach the base to the monitor. Connecting Your Monitor CAUTION: Before you begin any of the procedures in this section, follow the safety instructions. To connect your monitor to the computer perform the following steps/instructions: 1. Turn off your computer and disconnect the power cable. 2. Connect either the white (digital DVI-D (optional)) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do not use both cables on the same computer. Use both the cables only when they are connected to two different computers with appropriate video systems. Connecting the blue VGA cable Connecting the white DVI cable (optional)