Dell S2317HWI Monitor Users Guide - Page 21
Connecting Your Monitor, Connecting the HDMI cable
View all Dell S2317HWI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connecting Your Monitor WARNING: Before you perform any of the procedures in this section, follow the Safety Instructions. NOTE: The monitor is equipped with an antenna of the radio transmitter, so we recommend that you keep a safe distance of 20 cm at least between the monitor and you. NOTE: Route the cables through the cable-management slot before connecting them. NOTE: Do not connect all cables to the computer at the same time. To connect your monitor to the computer: 1 Turn Off your computer and disconnect the power cable. 2 Connect the DC out cable of the wireless charging base to the power adapter port on the monitor. 3 Connect the HDMI cable from your monitor to the computer. 4 Connect the power cable with 19.5V DC adapter (supplied with the monitor) to the power adapter port on the wireless charging base. 5 Connect the power cables for your computer and monitor into nearby outlets. 6 Turn On the monitor and the computer. Connecting the HDMI cable CAUTION: The graphics are used for the purpose of illustration only. Appearance of the computer may vary. Setting Up the Monitor | 21