Dell S2417DG Monitor Users Guide - Page 40
Built-in Diagnostics, again. The color of the screen changes to red.
![]() |
View all Dell S2417DG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Built-in Diagnostics Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. To run the built-in diagnostics: 1 Ensure that the screen is clean (no dust particles on the surface of the screen). 2 Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self-test mode. 3 Press and hold Button 1 for 5 seconds. A gray screen appears. 4 Carefully inspect the screen for abnormalities. 5 Press Button 1 again. The color of the screen changes to red. 6 Inspect the display for any abnormalities. 7 Repeat steps 5 and 6 to inspect the display in green, blue, black, and white screens. The test is complete when the white screen appears. To exit, press Button 1 again. If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer. 40 | Troubleshooting
![](/manual_guide/products/dell-s2417dg-monitor-users-guide-7cf4ab1/40.png)