Dell S3048-ON EMC PowerSwitch Installation Guide March 2022 - Page 18
Switch installation, 1U front-rack installation
![]() |
View all Dell S3048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Figure 8. Four-post threaded configuration 2. For each rail, attach the front and rear flanges to the post flanges with two user-supplied screws at each end, item 2. Switch installation You can mount the switch in the 1U front-rack or 1U flush or center two-post configurations. The following is an example of a front-rack configuration: For the 1U flush or center two-post configurations, slide the switch into the rails in the same manner as the four-post configurations. 1U front-rack installation Configure the rails that are attached to the switch. 1. Attach the inner chassis members switch rails to the S3048-ON switch. Item 3 shows the detail for the front standoff with the locking tab. 18 Install the S3048-ON
![](/manual_guide/products/dell-s3048on-emc-powerswitch-installation-guide-2022-db3854b/18.png)
Figure 8. Four-post threaded configuration
2.
For each rail, attach the front and rear flanges to the post flanges with two user-supplied screws at each end, item 2.
Switch installation
You can mount the switch in the 1U front-rack or 1U flush or center two-post configurations. The following is an example of a
front-rack configuration:
For the 1U flush or center two-post configurations, slide the switch into the rails in the same manner as the four-post
configurations.
1U front-rack installation
Configure the rails that are attached to the switch.
1.
Attach the inner chassis members switch rails to the S3048-ON switch.
Item 3 shows the detail for the front standoff with the locking tab.
18
Install the S3048–ON