Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.6 - Page 1012

Parameters process-id vrf vrf-name Enter the OSPF Process ID to clear a specific process. If no Process ID is entered, all OSPF processes are cleared. Enter the keyword vrf followed by the name of the VRF to clear all OSPF routing tables corresponding to that VRF. statistics interface name Enter the keyword statistics to clear the packet statistics in interfaces and neighbors. (OPTIONAL) Enter the keyword interface then one of the following interface keywords and slot/port or number information: • For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a VLAN, enter the keyword vlan then a number from 1 to 4094. • For Port Channel groups, enter the keywords port-channel then a number. neighbor router-id (OPTIONAL) Enter the keyword neighbor then the neighbor's router-id in dotted decimal format (A.B.C.D.). Defaults None Command Modes EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version Description 9.12(1.0) 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 7.5.1.0 pre- 6.1.1.1 Introduced on the S5048F-ON. Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Added support for the Multi-Process OSPF. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. 1012 Open Shortest Path First (OSPFv2 and OSPFv3)