Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.6 - Page 1250

default-metric Change the default metric for routes. To ensure that all redistributed routes use the same metric value, use this command with the redistribute command. Syntax Parameters default-metric number To return the default metric to the original values, use the no default-metric command. number Specify a number. The range is from 1 to 16. The default is 1. Defaults 1 Command Modes ROUTER RIP Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version Description 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.8.1.0 7.6.1.0 pre- 6.2.1.1 Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information This command ensures that route information being redistributed is converted to the same metric value. Related Commands • redistribute - allows you to redistribute routes learned by other methods. description Enter a description of the RIP routing protocol. Syntax Parameters Defaults description {description} To remove the description, use the no description {description} command. description Enter a description to identify the RIP protocol (80 characters maximum). none 1250 Routing Information Protocol (RIP)