Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.6 - Page 1396

Version 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.5(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 E-Series Description Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Added support for roles on the Z9000, S6000, S4820T, S4810, and MXL. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series. Introduced on the S-Series. Introduced on the C-Series. Original command. Usage Information Users entering EXEC Privilege mode or any other configured privilege level can access configuration commands. To protect against unauthorized access, use the enable password command to configure a password for the enable command at a specific privilege level. If no privilege level is specified, the default is privilege level 15. NOTE: If you are authorized for the EXEC Privilege mode by your role, you do not need to enter an enable password. Related Commands • enable password - configures a password for the enable command and to access a privilege level. role Changes command permissions for roles. Syntax role mode { { { addrole | deleterole } role-name } | reset } command To delete access to a command, use the no role mode role-name Parameters mode Enter one of the following keywords as the mode for which you are controlling access: configure for CONFIGURATION mode exec for EXEC mode interface for INTERFACE modes line for LINE mode route-map for Route-map mode router for Router mode addrole deleterole Enter the keyword addrole to add permission to the command. You cannot add or delete rights for the sysadmin role. Enter the keyword deleterole to remove access to the command. You cannot add or delete rights for the sysadmin role. role-name reset command Enter a text string for the name of the user role up to 63 characters. These are 3 system defined roles you can modify: secadmin, netadmin, and netoperator. Enter the keyword reset to reset all roles back to default for that command. Enter the command's keywords to assign the command to a certain access level. You can enter one or more keywords. 1396 Security