Dell S5000 FTOS 9.0(1.3) Command Line Reference Guide for the Switch - Page 1254

Example Related Commands FTOS#calendar set 08:55:00 june 18 2006 FTOS# clock read-calendar - sets the software clock based on the hardware clock. clock set - sets the software clock. clock update-calendar - sets the hardware clock based on the software clock. show clock - displays the clock settings. clock read-calendar Set the software clock on the switch from the information set in hardware clock (calendar). S5000 Syntax Defaults Command Modes Command History clock read-calendar Not configured. EXEC Privilege Version 9.0(1.3) Introduced on the S5000. Usage Information In the switch, the hardware clock is separate from the software and is called the calendar. This hardware clock runs continuously. After the hardware clock (the calendar) is set, the FTOS automatically updates the software clock after system bootup. You cannot delete this command (there is not a no version of this command). clock set Set the software clock in the switch. S5000 Syntax Parameters clock set time month day year time month day Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format; example, 17:15:00 is 5:15 pm. Enter the name of one of the 12 months, in English. You can enter the number of a day and change the order of the display to time day month year. Enter the number of the day. The range is 1 to 31. You can enter the name of a month to change the order of the display to time month day year. 1254