Dell S5000 FTOS 9.0(1.3) Command Line Reference Guide for the Switch - Page 820

show mac accounting access-list Display destination counters for Layer 2 traffic (available on physical interfaces only). S5000 Syntax Parameters show mac accounting {access-list name {interface type slot/ port} {in | out}}} access-list name interface type slot/port Enter the name of a configured access-list, up to 140 characters. (OPTIONAL) Enter the keyword interface followed by the interface type, slot and port information: • For a 10-Gigabit Ethernet interface, enter the keyword tengigabitethernet followed by slot/port numbers. The port range is 0 to 63. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by slot/port numbers. The ports are 48, 52, 56, and 60. • For a Port Channel interface, enter the keywords portchannel followed by a number from 1 to 128. in | out Identify whether the ACL is applied on the ingress or egress side. Command Modes • EXEC • EXEC Privilege Command History Version 9.0(1.3) Introduced on the S5000. Usage Information Example MAC Accounting information can be accessed using SNMP via the Force10 MONITOR MIB. For more information about enabling SNMP, refer to the FTOS Configuration Guide. NOTE: Currently, the Force10 MONITOR MIB does not return the MAC addresses in an increasing order using SNMP. As a workaround, you can use the -C c option in snmpwalk or snmpbulkwalk to access the Force10 MONITOR MIB. For example: % snmpwalk -C c -v 2c -c public 133.33.33.131 enterprise.6027.3.3.3 FTOS-1#sh mac accounting access-list WORD interface tengigabitethernet 0/1 in Destination Out Port VLAN Packets Bytes 00:44:00:00:00:02 00:44:00:00:00:01 00:22:00:00:00:00 00:44:00:00:00:02 00:44:00:00:00:01 Te 11/0 1000 10000 Te 11/0 1000 10000 Te 11/0 1000 10000 Te 11/0 2000 10000 Te 11/0 2000 10000 5120000 5120000 5120000 5120000 5120000 FTOS-1# 820