Dell S5000 FTOS 9.0(1.3) Command Line Reference Guide for the Switch - Page 1258

clock timezone Configure a timezone for the switch. S5000 Syntax Parameters clock timezone timezone-name offset To delete a timezone configuration, use the no clock timezone command. timezone-name offset Enter the name of the timezone. You cannot use spaces. Enter one of the following: • a number from 1 to 23 as the number of hours in addition to universal time coordinated (UTC) for the timezone. • a minus sign (-) followed by a number from 1 to 23 as the number of hours. Defaults Command Modes Command History Usage Information Not configured. CONFIGURATION Version 9.0(1.3) Introduced on the S5000. Coordinated universal time (UTC) is the time standard based on the International Atomic Time standard, commonly known as Greenwich Mean time. When determining system time, you must include the differentiator between UTC and your local timezone. For example, San Jose, CA is the Pacific Timezone with a UTC offset of -8. clock update-calendar Set the switch hardware clock based on the software clock. S5000 Syntax Defaults Command Modes Command History clock update-calendar Not configured. EXEC Privilege Version 9.0(1.3) Introduced on the S5000. Usage Information Related Commands Use this command only if you are sure that the hardware clock is inaccurate and the software clock is correct. You cannot delete this command (there is not a no form of this command). calendar set - sets the hardware clock. 1258