Dell S5232F-ON EMC Networking OS10 Enterprise Edition Switch Configuration Gui - Page 17
Configuration planning
![]() |
View all Dell S5232F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
5 Configuration planning 5.1 VLANs and IP addresses VLANs and IP addresses used for VxRail node traffic must be planned before switch configuration and VxRail deployment can begin. VxRail node traffic is divided into four or more VLANs as shown in Table 1. VLAN VLANs used for VxRail nodes Purpose Management Single VLAN for in-band management traffic used for VxRail node-to-node, ESXi host management, vCenter server, NTP, DNS, and VxRail management traffic vMotion Single VLAN for virtual machine (VM) migration vSAN Single VLAN for vSAN storage traffic VM Network(s) One or more VLANs for VM data traffic VLAN configuration and IP network addresses planned for this deployment are shown in Table 2. VLANs and IP addresses VLAN ID Description Network 1611 In-Band Management 172.16.11.0/24 1612 vMotion 172.16.12.0/24 1613 vSAN 172.16.13.0/24 1614 VM Network A 172.16.14.0/24 1615 VM Network B 172.16.15.0/24 Gateway 172.16.11.254 NA NA Optional, not used Optional, not used VLAN Traffic Untagged Tagged Tagged Tagged Tagged Note: By default, VxRail does not enable routing of vSAN or vMotion traffic. This example uses two networks for VM data traffic, VM Network A and VM Network B, with each on a separate VLAN. The actual number of VM data networks used is based on customer requirements. 17 Dell EMC Networking OS10 Enterprise Edition Switch Configuration Guide for VxRail featuring S5248F-ON, S5232F-ON and S5148F-ON
![](/manual_guide/products/dell-powerswitch-s5148fon-emc-networking-os10-enterprise-edition-switch-configuration-guide-vxrail-featuring-s5248fon-s5232fon-s5148fon-90d5260/17.png)