Dell S5248F-ON Open Networking Hardware Diagnostic Guide December 2021 - Page 69
SMF MSS upgrade, root@dell-diag-os:/opt/dellemc/diag/bin# smarttool
View all Dell S5248F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
CLI options root@dell-diag-os:/opt/dellemc/diag/bin# smarttool ERROR: main[100]: ERROR: Usage: smarttool [|] Usage: smarttool [] [|] - Command string (Refer below for supported commands) - UART device name (say, "/dev/tty00") - Specify image file path for upgrade - Specify image region. (G, A, B for MSS regions, g, a for FPGA region) Following commands are supported: -um - Upgrade MSS image -uf - Upgrade FPGA image -gmr - Get MSS running image region -gfr - Get FPGA running image region -gmv - Get MSS running image version -smr - Select MSS running image region -sfr - Select FPGA running image region -help - Dispay help SMF MSS upgrade You can upgrade SMF MSS using the following steps: To find out what region is running, use the gmr option. ● If MSS is running in region A, use the region B image to upgrade the MSS. ● If MSS is running in region B, use the region A image to upgrade the MSS. ● If MSS is running in region G, use the region A image to upgrade the MSS. Upgrade mss A-region when mss is running in G-region: ./smarttool -um /dev/ttyS0 _SMF_MSS_v1.41_A_region.bin Upgrade mss B-region when mss is running in A-region: ./smarttool -um /dev/ttyS0 _SMF_MSS_v1.41_B_region.bin Upgrade mss A-region when mss is running in B-region: ./smarttool -um /dev/ _SMF_MSS_v1.41_A_region.bin 1. Copy all the binaries needed for the upgrade into a local directory. Figure 6. Copy all needed binaries 2. Check the MSS region using the smarttool -gmr /dev/ttyS0 command. Dell EMC DAIG-OS tools 69