Dell Vostro 15 3559 Dell Vostro 153559 Owners Manual - Page 13

Installing the Memory Module, Removing the WLAN Card, Installing the WLAN Card, Removing the Coin-

Get Dell Vostro 15 3559 PDF manuals and user guides View all Dell Vostro 15 3559 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Installing the Memory Module 1. Insert the memory module into the socket and press to lock the securing clips. 2. Install: a. access panel b. battery 3. Follow the procedures in After Working Inside Your computer . Removing the WLAN Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. battery b. access panel 3. Perform the following steps as shown in the illustration: a. Remove the screw that secures the WLAN card to the system board [1,2]. b. Remove the two connectors that secure the WLAN card to the system board [3]. c. Remove the WLAN card from its socket [4]. Installing the WLAN Card 1. Insert the WLAN card into its slot and tighten the screw to secure it to the system board. 2. Connect the two connectors (black cable to the black triangle and white cable to the white triangle). 3. Install: a. access panel b. battery 4. Follow the procedures in After Working Inside Your computer Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. battery b. access panel 3. Push the coin-cell release latch using a scribe and then pull the coin-cell battery to remove it from the computer. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
Installing the Memory Module
1.
Insert the memory module into the socket and press to lock the securing clips.
2.
Install:
a.
access panel
b.
battery
3.
Follow the procedures in
After Working Inside Your computer
.
Removing the WLAN Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
battery
b.
access panel
3.
Perform the following steps as shown in the illustration:
a.
Remove the screw that secures the WLAN card to the system board [1,2].
b.
Remove the two connectors that secure the WLAN card to the system board [3].
c.
Remove the WLAN card from its socket [4].
Installing the WLAN Card
1.
Insert the WLAN card into its slot and tighten the screw to secure it to the system board.
2.
Connect the two connectors (black cable to the black triangle and white cable to the white triangle).
3.
Install:
a.
access panel
b.
battery
4.
Follow the procedures in
After Working Inside Your computer
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
battery
b.
access panel
3.
Push the coin-cell release latch using a scribe and then pull the coin-cell battery to remove it from
the computer.
13