Dell Vostro 15 3559 Dell Vostro 153559 Owners Manual - Page 18
Installing the Input/Output (I/O) Board, After Working Inside Your computer
View all Dell Vostro 15 3559 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4. Perform the following steps as shown in the illustration: a. Disconnect the I/O board cable and lift it away from the computer [1,2]. Installing the Input/Output (I/O) Board 1. Connect the I/O board cable to the system board. 2. Install the I/O board into the chassis. 3. Install: a. base cover b. keyboard c. memory module d. hard drive e. WLAN card f. access panel g. optical-disk drive h. battery 4. Follow the procedures in After Working Inside Your computer . 18
4.
Perform the following steps as shown in the illustration:
a.
Disconnect the I/O board cable and lift it away from the computer [1,2].
Installing the Input/Output (I/O) Board
1.
Connect the I/O board cable to the system board.
2.
Install the I/O board into the chassis.
3.
Install:
a.
base cover
b.
keyboard
c.
memory module
d.
hard drive
e.
WLAN card
f.
access panel
g.
optical-disk drive
h.
battery
4.
Follow the procedures in
After Working Inside Your computer
.
18