Dell Vostro 20 3015 Owners Manual - Page 16
Installing the Convertor Board, Removing the Memory
View all Dell Vostro 20 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
4. Disconnect the cables from the convertor board. Remove the screws and lift the convertor board from the computer. Installing the Convertor Board 1. Tighten the screws to secure the convertor board to the computer. Connect the cables to the convertor board. 2. Install: a. back cover b. stand 3. Follow the procedures in After Working Inside Your Computer. Removing the Memory 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the stand. 3. Remove the back cover. 16
4.
Disconnect the cables from the convertor board. Remove the screws and lift the convertor board
from the computer.
Installing the Convertor Board
1.
Tighten the screws to secure the convertor board to the computer. Connect the cables to the
convertor board.
2.
Install:
a.
back cover
b.
stand
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Memory
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the stand.
3.
Remove the back cover.
16