Dell Vostro 20 3015 Owners Manual - Page 26
Installing the System Board
View all Dell Vostro 20 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4. Remove the screws that secure the system board to the computer. Lift to release the system board and remove it from the computer. Installing the System Board 1. Align the system board on the computer. 2. Tighten the screws to secure the system board to the computer. 3. Connect the following cables to the system board: a. camera cable b. LVDS cable c. system fan cable d. optical-drive cable e. hard-drive cable f. hard-drive/optical-drive power cable g. convertor-board cable h. touch cable (if available) i. power-switch cable j. speaker cable 4. Install: a. WLAN card b. heatsink c. system-board shield d. VESA bracket e. memory f. back cover g. stand 5. Follow the procedures in After Working Inside Your Computer. 26
4.
Remove the screws that secure the system board to the computer. Lift to release the system board
and remove it from the computer.
Installing the System Board
1.
Align the system board on the computer.
2.
Tighten the screws to secure the system board to the computer.
3.
Connect the following cables to the system board:
a.
camera cable
b.
LVDS cable
c.
system fan cable
d.
optical-drive cable
e.
hard-drive cable
f.
hard-drive/optical-drive power cable
g.
convertor-board cable
h.
touch cable (if available)
i.
power-switch cable
j.
speaker cable
4.
Install:
a.
WLAN card
b.
heatsink
c.
system-board shield
d.
VESA bracket
e.
memory
f.
back cover
g.
stand
5.
Follow the procedures in
After Working Inside Your Computer
.
26