Dell Vostro 20 3015 Owners Manual - Page 17
Installing the Memory, Removing the System-Board Shield
View all Dell Vostro 20 3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
4. Slide and lift the memory shield to remove it from the computer. 5. Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory module from its connector. Installing the Memory NOTE: Please use DIMM 2 slot if there is only one memory module available. 1. Align the notch on the memory-card with the tab in the system-board connector. 2. Press down on the memory module until the release tabs spring back to secure them in place. 3. Place the memory cage back into its place. 4. Install: a. back cover b. stand 5. Follow the procedures in After Working Inside Your Computer. Removing the System-Board Shield 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the stand. 3. Remove the back cover. 17