Dell Vostro 3360 Owner's Manual - Page 12

Installing the Coin-Cell Battery, Removing the Memory, Installing the Memory, Removing the Keyboard

Get Dell Vostro 3360 PDF manuals and user guides View all Dell Vostro 3360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Installing the Coin-Cell Battery 1. Push the coin-call battery into its slot on the system board. 2. Install the access panel. 3. Follow the procedures in After Working Inside Your Computer. Removing the Memory 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the access panel. 3. Use your fingertips to spread apart the securing clips on each end of the memory module connector until the memory module pops up and remove the memory module from its connector on the system board by drawing the module from the system board at 45-degree angle. Installing the Memory 1. Insert and secure the memory module to the system board. 2. Install the access panel. 3. Follow the procedures in After Working Inside Your Computer. Removing the Keyboard 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the screw that secures the keyboard to the chassis. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
Installing the Coin-Cell Battery
1.
Push the coin-call battery into its slot on the system board.
2.
Install the access panel.
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Memory
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the access panel.
3.
Use your fingertips to spread apart the securing clips on each end of the memory module connector until the
memory module pops up and remove the memory module from its connector on the system board by drawing the
module from the system board at 45-degree angle.
Installing the Memory
1.
Insert and secure the memory module to the system board.
2.
Install the access panel.
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Keyboard
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the screw that secures the keyboard to the chassis.
12