Dell Vostro 3590 Without optical drive Service Manual - Page 21

Solid-state drive/Intel Optane, Removing the M.2 2230 Solid-state drive

Get Dell Vostro 3590 PDF manuals and user guides View all Dell Vostro 3590 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Next steps 1. Connect the battery cable to the connector on the system board. 2. Replace the base cover 3. Replace the SD memory card 4. Follow the procedure in after working inside your computer Solid-state drive/Intel Optane Removing the M.2 2230 Solid-state drive Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the base cover 4. Disconnect the battery cable from the connector on the system board. Steps 1. Loosen the captive screw that secures the thermal plate to the palmrest and keyboard assembly [1]. 2. Remove the single (M2x3) screw that secures the thermal plate to the palmrest and keyboard assembly [2]. 3. Slide and remove the thermal plate from the solid-state drive slot [3]. Removing and installing components 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Next steps
1.
Connect the battery cable to the connector on the system board.
2.
Replace the
base cover
3.
Replace the
SD memory card
4.
Follow the procedure in
after working inside your computer
Solid-state drive/Intel Optane
Removing the M.2 2230 Solid-state drive
Prerequisites
1.
Follow the procedure in
before working inside your computer
2.
Remove the
SD memory card
3.
Remove the
base cover
4.
Disconnect the battery cable from the connector on the system board.
Steps
1.
Loosen the captive screw that secures the thermal plate to the palmrest and keyboard assembly [1].
2.
Remove the single (M2x3) screw that secures the thermal plate to the palmrest and keyboard assembly [2].
3.
Slide and remove the thermal plate from the solid-state drive slot [3].
Removing and installing components
21