Dell Vostro 3590 Without optical drive Service Manual - Page 54
Installing the system board, Power-adapter port, Removing the power adapter port
![]() |
View all Dell Vostro 3590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
2. Disconnect the following cables from the system board: a) Power button board cable [1]. b) Finger print board cable [2]. c) IO board cable [3]. d) Hard drive cable [4]. e) Touchpad cable [5]. f) Keyboard cable [6]. 3. Remove the single (M2x4) screw that secures the system board to the palmrest and keyboard assembly [1]. 4. Lift the system board off the palmrest and keyboard assembly [2]. Installing the system board Steps 1. Align the screw hole on the system board with the screw hole on the palmrest and keyboard assembly. 2. Replace the single (M2x4) screw that secures the system board to the palmrest and keyboard assembly. 3. Connect the following cables to the system board: a) Power button board cable [1]. b) Finger print board cable [2]. c) IO board cable [3]. d) Hard drive cable [4]. e) Touchpad cable [5]. f) Keyboard cable [6]. 4. Connect the power adapter port cable and speaker cable to the system board [1, 2]. Next steps 1. Replace the display assembly 2. Replace the heatsink 3. Replace the system fan 4. Replace the SSD 5. Replace the WLAN 6. Replace the memory 7. Replace the battery 8. Replace the base cover 9. Replace the SD memory card 10. Follow the procedure in after working inside your computer Power-adapter port Removing the power adapter port Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the base cover 4. Remove the battery 5. Remove the WLAN 6. Remove the SSD 7. Remove the display assembly 8. Remove the power button board 54 Removing and installing components
![](/manual_guide/products/dell-vostro-3590-optical-drive-service-manual-20a022b/54.png)