Dell Vostro 3590 Without optical drive Service Manual - Page 51

Installing the power button board, Power button, Removing the power button

Get Dell Vostro 3590 PDF manuals and user guides View all Dell Vostro 3590 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Installing the power button board Steps 1. Place the power-button board into the slot on the palmrest and keyboard assembly [1]. 2. Replace the single (M2x2) screw that secures the power button board to the palmrest and keyboard assembly [2]. 3. Affix the conductive tape to the power button board [3]. 4. Slide the power button cable to the system board and close the latch to secure the cable [4]. Next steps 1. Replace the display assembly 2. Replace the system fan 3. Replace the WLAN 4. Connect the battery cable to the connector on the system board. 5. Replace the base cover 6. Replace the SD memory card 7. Follow the procedure in after working inside your computer Power button Removing the power button Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the base cover 4. Disconnect the battery cable from the connector on the system board. 5. Remove the WLAN Removing and installing components 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Installing the power button board
Steps
1.
Place the power-button board into the slot on the palmrest and keyboard assembly [1].
2.
Replace the single (M2x2) screw that secures the power button board to the palmrest and keyboard assembly [2].
3.
Affix the conductive tape to the power button board [3].
4.
Slide the power button cable to the system board and close the latch to secure the cable [4].
Next steps
1.
Replace the
display assembly
2.
Replace the
system fan
3.
Replace the
WLAN
4.
Connect the battery cable to the connector on the system board.
5.
Replace the
base cover
6.
Replace the
SD memory card
7.
Follow the procedure in
after working inside your computer
Power button
Removing the power button
Prerequisites
1.
Follow the procedure in
before working inside your computer
2.
Remove the
SD memory card
3.
Remove the
base cover
4.
Disconnect the battery cable from the connector on the system board.
5.
Remove the
WLAN
Removing and installing components
51