Dell Vostro 3591 Without optical drive Service Manual - Page 35

Removing the heatsink, Installing the heatsink

Get Dell Vostro 3591 PDF manuals and user guides View all Dell Vostro 3591 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Next steps 1. Connect the battery cable to the connector on the system board. 2. Replace the battery 3. Replace the base cover 4. Replace the SD memory card 5. Follow the procedure in after working inside your computer Removing the heatsink Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the base cover 4. Disconnect the battery cable from the connector on the system board. Steps 1. Loosen the four captive screws that secure the heatsink to the system board [1]. NOTE: Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink. 2. Remove the three (M2x3) screws that secure the heatsink to the system board [2]. 3. Lift the heatsink off the system board [3]. Installing the heatsink Steps 1. Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1]. 2. Replace the three (M2x3) screws that secure the heatsink to the system board [2]. Removing and installing components 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Next steps
1.
Connect the battery cable to the connector on the system board.
2.
Replace the
battery
3.
Replace the
base cover
4.
Replace the
SD memory card
5.
Follow the procedure in
after working inside your computer
Removing the heatsink
Prerequisites
1.
Follow the procedure in
before working inside your computer
2.
Remove the
SD memory card
3.
Remove the
base cover
4.
Disconnect the battery cable from the connector on the system board.
Steps
1.
Loosen the four captive screws that secure the heatsink to the system board [1].
NOTE:
Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink.
2.
Remove the three (M2x3) screws that secure the heatsink to the system board [2].
3.
Lift the heatsink off the system board [3].
Installing the heatsink
Steps
1.
Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1].
2.
Replace the three (M2x3) screws that secure the heatsink to the system board [2].
Removing and installing components
35