Dell Vostro 3591 Without optical drive Service Manual - Page 52
Power button, Removing the power button
![]() |
View all Dell Vostro 3591 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Next steps 1. Replace the display assembly 2. Replace the system fan 3. Replace the WLAN 4. Connect the battery cable to the connector on the system board. 5. Replace the base cover 6. Replace the SD memory card 7. Follow the procedure in after working inside your computer Power button Removing the power button Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the base cover 4. Disconnect the battery cable from the connector on the system board. 5. Remove the WLAN 6. Remove the system fan 7. Remove the heatsink 8. Remove the display assembly 9. Remove the power button board Steps 1. Remove the single (M2x2) screw that secures the power button on the palmrest and keyboard assembly [1]. 2. Lift the power button off the palmrest and keyboard assembly [2]. 52 Removing and installing components
![](/manual_guide/products/dell-vostro-3591-optical-drive-service-manual-bd9875c/52.png)